The ritual of burning a candle
Your Kyuka candle is more than a scent โ it is a ritual worth celebrating properly. Look after it from the very first burn to enjoy the full experience and keep its beautiful vessel for years.
The first burn โ the most important one
- Let the wax melt all the way to the edges of the vessel. This is key to avoiding tunnelling.
- Burn the candle for at least 1โ2 hours, depending on its diameter.
A choice of wicks โ a ritual your way
Crackles softly like a miniature fireplace.
A classic that gives a steady flame.
Both types need regular trimming โ ideally with our wick trimmer.
Candle care
- Before every burn: trim the wick to about 5 mm.
- Putting it out: use a snuffer โ it is safer and does not spoil the scent.
- Never leave a candle unattended and do not burn it for more than 4 hours at a time.
How to save a tunnelling candle
If unburnt wax is left around the wick:
Give the candle more time โ until the whole surface has melted.
You can wrap a strip of aluminium foil with an opening for the wick to spread the heat evenly (for 1โ2 hours).
Candle burnt down? For us, it is only the beginning
Leave about 1 cm of wax โ that is the safe limit. Then:
- Fill the vessel with hot water from the kettle and a drop of washing-up liquid.
- The wax will float to the surface โ scoop it off or let it set and lift it out.
- Remove the metal wick base and rinse the vessel.
A second life for your candle
Our vessels are Polish design and handcraft โ we want them to stay with you for a long time:
Accessories worth having
The ideal wick length, less smoke.
A stylish way to put out the flame.
Any questions?
We are here for you โ write to us if you are not sure how to save a tunnelling candle or how to clean the vessel safely. For us it is not the end, it is a new beginning.
See candle care accessories
